Home → Sparkbooth Questions →

Alterar botão START

• Edit

Alan Nobre

24 May, 2022 03:36 PM

Gostaria de alterar o botão START, quero colocar um botão USB mas a opção de alterar o botão não existe.

• troca_de_botão.jpg 304 KB
• troca_de_botão2.jpg 400 KB

1. Support Staff 1 Posted by Joe Connell on 24 May, 2022 04:02 PM

   

   Clear the text in the "Start text" box and there will be no text on screen

   • No_Button.png 1.63 MB
   • Edit

2. 2 Posted by Alan Nobre on 24 May, 2022 04:19 PM

   

   Quero que o botão de inicio seja um outro botão, não barra de espaço e nem ENTER, quero colocar outro botão USB, como altero a tecla?

   • Edit

3. Support Staff 3 Posted by Joe Connell on 24 May, 2022 04:25 PM

   

   You say Home button = Start button
   If you are adding a physical USB Button to tap/touch,
   you need to be able to program the button for the SPACE BAR command.
   That will Start the session the same as using an on screen button or a Touch screen.

   • Edit

4. 4 Posted by Alan Nobre on 24 May, 2022 04:28 PM

   

   OK e como faço isso? eu tenho o botão USB, como faço o botão dar o comando para a barra de espaço?

   • Edit

5. Support Staff 5 Posted by Joe Connell on 24 May, 2022 04:35 PM

   

   When you plug in the USB button to the computer,
   does the computer bring up a box to use the button.
   Usually when a device is plugged in to a USB purt,
   the computer needs to know what to do with it.

   If this is a Buttom you made, I am not sure how
   you would set it for commands.
   If it was a Button you purchased, there should be
   instructions or a program built in to progran the
   command to the computer for what is to happen
   when the button is pressed.

   • Edit

6. 6 Posted by Alan Nobre on 24 May, 2022 04:38 PM

   

   Estou usando uma placa Zero Delay de Arcade como esta abaixo, ela é plug in play, não tem nenhuma software.

   https://pt.aliexpress.com/item/1005001604578101.html?spm=a2g0o.productlist.0.0.7d1810b8sGQGwW&algo_pvid=ccf17b2c-f2db-4739-a04d-bc515da5c756&algo_exp_id=ccf17b2c-f2db-4739-a04d-bc515da5c756-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000016761333316%22%7D&pdp_npi=2%40dis%21BRL%21%2145.88%21%21%21%21%21%4021031a5516534102209324449e63b6%2112000016761333316%21sea

   • Edit

7. Support Staff 7 Posted by Joe Connell on 24 May, 2022 04:41 PM

   

   I have a 6 Button USB controller that I set
   the commands for each button when pressed.

   In the Sparkbooth Settings > Keyboard it shows
   all the short cut commands to do different funtions.

   • 6ButtonController.png 187 KB
   • Edit

8. 8 Posted by Alan Nobre on 24 May, 2022 04:54 PM

   

   Poderia me enviar o software controlador de USB?

   • Edit

9. Support Staff 9 Posted by Joe Connell on 24 May, 2022 05:10 PM

   

   We do not have driver software...
   If you purchase a button, that company should be able
   to tell you how to program it to use a SPACE BAR command.

   That 6 Button Controler I purchased came with software
   to program the buttons as it shows on screen.
   I would search Google for a USB Button that can be set
   for use in a Photo Booth...

   • Edit

10. 10 Posted by Alan Nobre on 24 May, 2022 05:12 PM

    

    Estou no Brasil e aqui não tem, os que encontrei não envia para Brasil

    • Edit

11. Support Staff 11 Posted by Joe Connell on 24 May, 2022 05:17 PM

    

    Then you need to find someone near you
    who knows how to program a USB button
    to send the SPACE BAR command when pressed.

    We only provide support for the software,
    not items attached to the computer like Switches,
    buttons, lights, etc. Sorry.

    • Edit

12. 12 Posted by Alan Nobre on 24 May, 2022 05:50 PM

    

    Ok Obrigado!

    • Edit