tag:help.sparkbooth.com,2010-04-06:/discussions/sparkbooth-dslr-beta/3778-cut-dnp-rx1-with-2x6-or-4x6Sparkbooth: Discussion 2016-05-17T19:38:50Ztag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-02T04:52:51Z2016-05-02T04:52:51Zcut DNP RX1 with 2x6 or 4x6 <div><p>NO, that is not possible in any photo booth software that I know
of. Because the software only sends an image to the printer, it is
always a 4x6 even if you are using a double (2x6 split) or a full
4x6 layout. The printer only sees a full 4x6 image, you set the
printer to split/cut it to (2) 2x6 from the 4x6 image it receives
from the printer.<br>
So you would need to manually change your printer setting each time
you change from a 4x6 split double layout to a full 4x6 layout.</p></div>Joe Connelltag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-02T04:58:54Z2016-05-02T04:58:56Zcut DNP RX1 with 2x6 or 4x6 <div><p>or putting photobooth must immediately specify that they be the
only two belts and then give to choose a photo layout but maintain
the appearance of two strips of 2x6 . Or you could be assumed in
advance that today photobooth takes pictures of size 4x6 and 2x6
off cutting systems and prepare a photo which will be in the size
4x6 . As I understand it at the time or do customers 2x6 or 4x6
photos do not give advice without manual adjustment of the printer
to automatically cut 2x6 or 4x6 ?</p></div>marcin klochtag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-02T05:14:19Z2016-05-02T05:14:19Zcut DNP RX1 with 2x6 or 4x6 <div><p>As I said... there is no software that I know of that can change
the PRINTER settings automatically from 4X6 full layout cuts then
change it to (2) 2x6 split cuts...<br>
There are too many printer companies and it is not possible to know
what each printer code changes would be required for the software
to make those changes.</p>
<p>Photo booth companies (that I have contact with) always set up
their layouts to be all 4x6 full OR all double split (2) 2x6
size...</p>
<p>It sounds like you want to drop off a photo booth at a location
and let it run without any attendant and let the guest/users make
all the selections... <strong>THIS CAN BE DONE WITH THIS
SOFTWARE</strong> you just need to only use all layouts with the
same full 4x6 <strong>OR</strong> all layouts double split (2)
2x6...</p></div>Joe Connelltag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-02T05:26:21Z2016-05-02T05:26:22Zcut DNP RX1 with 2x6 or 4x6 <div><p>ok thanks for the reply I asked because in Poland, one company
wrote software photobooth that has this capability with the printer
RX1 has a possibility that during the shooting FOR IN the camera ,
you can select the 1 image will be black and white second photo
spia a third example . color Also, I the ability to display
captions scrolling across the screen form of advertising or another
message but the program cost a lot because I chose yours.</p></div>marcin klochtag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-02T05:37:01Z2016-05-02T05:37:01Zcut DNP RX1 with 2x6 or 4x6 <div><p>All of that can be done in Sparkbooth software... but you can
not change the PRINTER CUTTING from 2 strips to a full 4x6 without
manually changing the PRINTER settings in the printer controls. I
do not think your Poland software company can do that either...
because as I said, there are too many different printer companies
that use different coding and there is no way for the software to
make those PRINTER settings by the size photo layouts that is being
sent to the printer.</p>
<p>The Sparkbooth software can do all that you said<br>
<strong>you can select the 1 image will be black and white second
photo spia a third example . color Also, I the ability to display
captions scrolling across the screen form of advertising or another
message</strong></p></div>Joe Connelltag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-03T18:22:53Z2016-05-03T18:22:53Zcut DNP RX1 with 2x6 or 4x6 <div><p>Marcin,<br>
there is software that does what you ask, you just need to do your
research. Im not here to recommend another software other than
Sparkbooth, so you will have to figure that out yourself. sorry</p></div>richardflores14tag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-04T15:18:35Z2016-05-04T15:18:37Zcut DNP RX1 with 2x6 or 4x6 <div><p>HI richardflores14 can you write to me email marcin dot kloch at
interia dot pl thanks</p></div>Marcintag:help.sparkbooth.com,2010-04-06:Comment/397726582016-05-04T16:47:18Z2016-05-04T16:47:18Zcut DNP RX1 with 2x6 or 4x6 <div><p>Hello Marcin,</p>
<p>The software that Richard is referring to (I suspect)<br>
is much higher in price than Sparkbooth and the features<br>
you are looking for are in the Top End of their pricing.</p>
<p>I did state to you that Sparkbooth <strong>CAN DO</strong> most
of what you are requesting and for you to know what software is
right for you, you need to download a Trial version and try it
out... ask questions here after you have tried it so we can help
you.</p></div>Joe Connell