Photo strip AND 6x4

Jessy's Avatar

Jessy

26 Jun, 2019 08:25 AM

Hi,

i have a DNP DS 620 Printer and can't configure my printer to cut or not the photo if a strip or a 6x4 template is selected.
If activated on my Windows settings it cut all photos.

Any way to make it activate / deactivate automatically ?

Thanks

  1. Support Staff 1 Posted by Rob (ZCZ) on 26 Jun, 2019 11:57 AM

    Rob (ZCZ)'s Avatar

    I think you are asking if there is a way to "press a button" and have the printer cut 4x6 into 2x6 and the reverse (not cut). From the research I have done there is not an easy way to do this.
    It seems to me that it could be automated with the use of saved printer presets but I can't find anyone who is doing it.

  2. Support Staff 2 Posted by Jorge Oliva on 26 Jun, 2019 12:13 PM

    Jorge Oliva's Avatar

    The DNP DS 620 is very similar to the DNP Rx1 in its drivers the answer to your question is NO you cant auto switch from a 2x6 cut to a 4x6 full template this function has to be done manually (see picture)

  3. 3 Posted by Jessy on 26 Jun, 2019 01:13 PM

    Jessy's Avatar

    Thanks Rob and Jorge, i wanted an option in Sparkbooth to check if photo need to be cut or not and change automatically the settings Jorge is talking about.

  4. Support Staff 4 Posted by Joe Connell on 26 Jun, 2019 01:45 PM

    Joe Connell's Avatar

    NO... if you want to do both 4X6 and (2) 2X6 strips
    you would need to set it to NOT cut the 4X6 and
    Manually cut each (2) 2X6 for the double strip layouts.

    There is no way to do both with out cutting the full 4X6.
    ...maybe some day in the future the printer MGF's will
    make a way to do this, but it is not possible at this time.

  5. 5 Posted by Jessy on 26 Jun, 2019 01:54 PM

    Jessy's Avatar

    OK, thanks Joe, that is so bad, should be really cool to be able to do this. Whas thinking it would be possible ! :(

  6. John Wu closed this discussion on 10 Jul, 2019 08:55 PM.

Comments are currently closed for this discussion. You can start a new one.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac