choosing a photolayout

rikv's Avatar


27 Sep, 2021 05:02 PM

Hi, a new client wants the possibility to have and choose between only 2 custom made photolayouts at their wedding.
So therefore i would have to remove all my previous made and factory ones.
How to do this?
In which systemfile are the photo layouts stored?
So i could place the old ones back afterwards.

  1. Support Staff 1 Posted by John Wu on 27 Sep, 2021 05:06 PM

    John Wu's Avatar
  2. Support Staff 2 Posted by Joe Connell on 27 Sep, 2021 05:13 PM

    Joe Connell's Avatar

    No, you would only need to Unfavorite all the layouts
    that have a Red Heart and then only have the layouts
    your guest/users can select from to have a Red Heart.

    Every time time you create a NEW layout it is saved as
    a Favorite (with a Red heart)

    So when you create the New layouts for your event, they will have a Red Heart

    Let me know if you need help...

  3. 3 Posted by rikv on 27 Sep, 2021 05:15 PM

    rikv's Avatar

    Thnx Joe.

    Op ma 27 sep. 2021 19:13 schreef Joe Connell <
    [email blocked]>:

  4. 4 Posted by rikv on 29 Sep, 2021 02:33 AM

    rikv's Avatar

    The client wants to choose between 2 printlayouts. a fotocard and a 2x double cut.
    I guess this is not posiible, because the second option needs the printercutting setting and the first option not?

  5. Support Staff 5 Posted by Joe Connell on 29 Sep, 2021 02:44 AM

    Joe Connell's Avatar

    Well it NOW is possible using version 7.0
    There is a new feature Printer Pooling that you can have 2 printers connected and one will be set for the Full layout and the other will be set for the Cut (2) 2X6 double strips. The software will * recognize which layout goes to the right printer.
    (*) when you create a full layout the software will know it is full and when you create a Double strip, you will create it as (1) Single created double OR (2) create it with both (left and right) sides in the layout an check a boc Display split... that tell the software this layout goes to the printer you have set for double cutting.

    If you do not have 7.0... your only option is to Manually cut all double strips... I had done this in the early years, you can get a Small paper cutter and it only take 20 seconds or less to place the layout and cut it.

  6. 6 Posted by rikv on 29 Sep, 2021 06:14 AM

    rikv's Avatar

    Thank you for your help!

    Op wo 29 sep. 2021 04:44 schreef Joe Connell <
    [email blocked]>:

  7. John Wu closed this discussion on 13 Oct, 2021 01:13 PM.

Comments are currently closed for this discussion. You can start a new one.

Keyboard shortcuts


? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac