Jorge Oliva on 25 Sep, 2018 02:03 AM
first step what printer are you using reason I ask is if your using a printer with auto cutting ability to switch from strip to full 4x6 you have to do this manually the software can not turn off auto cutting automatically.
STEP 1. you need to create both template strip and 4x6. both template need to have the Red Heart activated. make sure you turn off any other template that have a red heart by just clicking on the heart.
STEP 2. click F2 and put a check mark on photo layout button this will add a button to the viewing screen
see attach pictures
any other question just ask
Joe Connell on 27 Sep, 2018 04:28 PM
You will need to set the PRINTER for
the 4X6 (2) cutting for the printer to cut
the 4X6 into (2) strips.
I do not have the Sinfonia CS2 printer
so I do not know what it is listed for splitting
a 4X6 (2) in the Sinfonia CS2 printer set up.
Some printers list it as 4 X6 (2) some have 4X6 (split)
John's link will show you how to do that