tag:help.sparkbooth.com,2010-04-06:/discussions/layout-creator-questions/6075-printsSparkbooth: Discussion 2018-10-18T22:18:38Ztag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-17T18:05:35Z2015-10-17T18:05:35ZPrints<div><p>Hi Annette. I use a RX1 printer check your settings with mine
and let me know if it worked</p></div>Jorge Olivatag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-18T04:17:38Z2015-10-18T04:17:38ZPrints<div><p>It is NOT your printer settings... you need to make<br>
a Margin Adjustment in the Sparkbooth Printer Settings.</p>
<p>Start by setting all margins to 0 and do a TEST print and<br>
a 4X6 graphic image will be printed with adjustment lines...<br>
it will show that you need to adjust one side of the print
margin<br>
and I would start with that side to 10 and do another TEST
print.</p>
<p>Do this a few times making small adjustments of 5 more and print
a TEST after each change... it may take you 2-3-4-5... TEST prints
with different adjustments until it prints perfect. Once it is set
perfect, you will not need to make any adjustments for any layouts
using this same printer.</p>
<p>I will be available on Sunday if you need additional help<br>
sorry, I was out on PB jobs and just got back after midnight.</p>
<hr>
<p>Joe Connell - SB Support</p></div>Joe Connelltag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-18T12:02:39Z2015-10-18T12:02:39ZPrints<div><p>Thanks so much Joe. I did try doing that and did so many test
prints and I couldn’t seem to get it right. It was so off. I
will continue to try. Thanks so much.</p>
<p>Annette Labrozzi<br>
Labrozzi Studios<br>
<a href="http://www.LabrozziStudios.com">www.LabrozziStudios.com</a><br>
703-909-8599</p>
<p>Winner of 2013 & 2014 Couple’s Choice Award and 2013
& 2014 Bride’s Choice Award!</p></div>Annette Labrozzitag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-18T13:28:03Z2015-10-18T13:28:03ZPrints<div><p>Do what Joe said but my main question why is this happening I
use a RX1 all my margin setting are at 0 and my prints comes out
centered it most be something in the layout</p></div>Jorge Olivatag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-18T13:52:38Z2015-10-18T13:52:38ZPrints<div><p>I have no idea. I worked with those numbers in the margin for
over an hour and its seems to be still out of whack. I will do
another one and include a picture of it.</p>
<p>Annette Labrozzi<br>
Labrozzi Studios<br>
<a href="http://www.LabrozziStudios.com">www.LabrozziStudios.com</a><br>
703-909-8599</p>
<p>Winner of 2013 & 2014 Couple’s Choice Award and 2013
& 2014 Bride’s Choice Award!</p></div>Annette Labrozzitag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-25T18:45:41Z2015-10-25T18:45:41ZPrints<div><p>Hi Jorge,</p>
<p>Thank you for your help! Now, I have one more issue and for the
life of me I can’t find out what the issue is! So, when I
print out in spark booth software it prints out the way I want it
to. Without a 2 inch cut for the 4x6 which is good! But, when I
have images to print out that are on my desktop (not in the spark
booth software) it automatically cuts them and I even went into the
printing preferences and the “2inch cut” is disabled.
For the life of me I can’t figure out why in Sparkbooth it
doesn’t cut them yet when I take those same images and try to
print them from my desktop it cuts them. Any clue?</p>
<p>Annette Labrozzi<br>
Labrozzi Studios<br>
<a href="http://www.LabrozziStudios.com">www.LabrozziStudios.com</a><br>
703-909-8599</p>
<p>Winner of 2013 & 2014 Couple’s Choice Award and 2013
& 2014 Bride’s Choice Award!</p></div>Annette Labrozzitag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-25T18:47:57Z2015-10-25T18:47:57ZPrints<div><p>Thank you for your help! Now, I have one more issue and for the
life of me I can’t find out what the issue is! So, when I
print out in spark booth software it prints out the way I want it
to (4x6 no cut). But, when I have images to print out that are on
my desktop (not in the spark booth software) it automatically cuts
them and I even went into the printing preferences and the
“2inch cut” is disabled. For the life of me I
can’t figure out why in Sparkbooth it doesn’t cut them
yet when I take those same images and try to print them from my
desktop it cuts them. And I double checked the printer preference
is the 2 inch cut is definitely disabled so not sure why they are
still being cut. Any clue?</p>
<p>Annette Labrozzi<br>
Labrozzi Studios<br>
<a href="http://www.LabrozziStudios.com">www.LabrozziStudios.com</a><br>
703-909-8599</p>
<p>Winner of 2013 & 2014 Couple’s Choice Award and 2013
& 2014 Bride’s Choice Award!</p></div>Annette Labrozzitag:help.sparkbooth.com,2010-04-06:Comment/382238472015-10-25T19:02:14Z2015-10-26T13:02:21ZPrints<div><p>That's weird. normally sparkbooth is only a program that sends
pictures to printer do this when you print from your desktop it
should bring up a window that ask you what size paper etc. on that
window you should see (printer setup) see photo attach, open set up
and check to see if your setting are right</p></div>Jorge Oliva